Triflex ProTerra Insulated system can incorporate polyisocyanurate (PIR), vacuum insulated panels (VIP), mineral wool and expanded polystyrene (EPS) insulation or combinations of the materials. The build-up is dependent upon the required U-value and condensation risk analysis and in addition to the insulation may include Triflex Spray FastPrime, Triflex Self Adhesive Air and Vapour Control Layer, Triflex Insulation Adhesive and Triflex Self Adhesive Carrier Membrane.
System build-up
Vapour control layer (if required)
Spray FastPrime
Drying time: Approx. 5 - 10 minutes at 5°C
Consumption: 0.08Kg/m²
Air and vapour control layer
Overcoat / traffic: Immediate
Consumption: 1.08m²/m²
Insulation
Triflex Duo Insulation Adhesive
Overcoat / traffic: Immediate
Consumption: 0.150 - 0.225L/m²
Insulation
Overcoat / traffic: Immediate
Consumption: 1.00m²/m²
Impact resistant substrate
Teroson TK395 Adhesive
Overcoat / traffic: Immediate
Consumption: 0.04L/m²
Wood-Fibre Cement Board C
Overcoat / traffic: Immediate
Consumption: 1.00m²/m²
Primer
Cryl primer 276
Primer for cementitious and other substrates.
Overcoat / traffic: 45 minutes
Consumption: 0.60Kg/m²
Waterproofing and surfacing system
Available in four surface finishes - refer to relevant Triflex ProTerra system overview:
Available in four surface finishes - refer to relevant Triflex ProTerra system overview:
Finish options
Triflex ProTerra Insulated is available with a wide range of finish options including Quartz Design, Colour Design and Chips Design and over 50 finish colours. The system can be tailored to meet aesthetic and project needs with special colours being produced to order.