Triflex Towersafe is a specially developed solution designed to waterproof the entire wind turbine, including the tower, foundation, rotor blades and nacelles.
System build-up
Primers
Metal Primer
Primer for metal substrates, also available as spray can.
Overcoat / traffic:
60 minutes using spray can
60 minutes using roller
Towersafe Primer
Primer for cementitious and other substrates.
Overcoat / traffic: 45 minutes
Consumption: 0.40Kg/m² minimum
Reinforced waterproofing (single process)
Towersafe
Waterproofing resin used with Triflex 110g Reinforcement Fleece and as the optional wearing layer in the Triflex Towersafe wind turbine waterproofing system.
Overcoat / traffic: 45 minutes
Consumption: 3.00Kg/m² minimum
110g Reinforcement Fleece
Polyester fleece used with Triflex resins in Triflex fully and partially reinforced systems.
Resin colours
Triflex Towersafe is available in 3 standard resin colours.
For an enhanced range of colour choices why not take a look at Triflex Towersafe with a coloured finish which allows the system to be tailored to meet aesthetic and project needs. Additionally, special colours can be produced to order.