Triflex Towersafe with a heavy duty finish can be used locally for areas that are trafficked where increased skid, impact and abrasion resistance are required.
System build-up
Primers
Metal Primer
Primer for metal substrates, also available as spray can.
Overcoat / traffic:
60 minutes using spray can
60 minutes using roller
Towersafe Primer
Primer for cementitious and other substrates.
Overcoat / traffic: 45 minutes
Consumption: 0.40Kg/m² minimum
Reinforced waterproofing (single process)
Towersafe
Waterproofing resin used with Triflex 110g Reinforcement Fleece and as the optional wearing layer in the Triflex Towersafe wind turbine waterproofing system.
Overcoat / traffic: 45 minutes
Consumption: 3.00Kg/m² minimum
110g Reinforcement Fleece
Polyester fleece used with Triflex resins in Triflex fully and partially reinforced systems.
Embedment layer
Towersafe
Waterproofing resin used with Triflex 110g Reinforcement Fleece and as the optional wearing layer in the Triflex Towersafe wind turbine waterproofing system.
Overcoat / traffic: 1 hour
Consumption: 1.00Kg/m²
Aggregate: Quartz 0.7-1.2mm: 6.00Kg/m²
Heavy duty finish
Towersafe Finish
Finish for Triflex wind turbine waterproofing, surfacing and coating systems.
Foot traffic: 1 hour
Withstand stress: 2 hours
Consumption: 0.60Kg/m²
Finish colours
Triflex Towersafe with a coloured finish is available in 7 optional finish colours, allowing the system to be tailored to meet aesthetic and project needs. Special colours can be produced to order.