Triflex ProTect with optional heavy duty finish technical details

Technical details

Triflex ProTect with optional heavy duty finish

Can be used locally for walkways and higher trafficked areas where increased skid, impact and abrasion resistance are required, or for entire roof areas.

  • Dry film thickness c.a. 4mm
  • System weight c.a. 10.10Kg/m²
  • Impact and abrasion resistant
  • Low slip potential (PTV>36) based on HSE guidance (tested wet using Four S rubber (slider 96) on new indicative sample): PTV approx. 75
  • High retention of PTV over time
  • Available in a wide range of colours

System build-up

Thumbnail
1

Primers (if required)

Cryl Primer 222

Triflex Cryl Primer 222

Primer for asphalt, bitumen, timber and other substrates.

Overcoat / traffic: 45 minutes
Consumption: 0.40Kg/m²

Cryl Primer 276

Cryl Primer 276

Primer for cementitious and other substrates.

Overcoat / traffic: 45 minutes
Consumption: 0.40Kg/m²

Primer 610

Primer 610

Primer for single-ply membranes, liquid coatings and coated metals.   

Overcoat / traffic: 20 minutes
Consumption: 0.06L/m² min.

Product data sheet

Metal Primer

Metal Primers

Primer for metal substrates, also available as spray can.

Overcoat / traffic:
60 minutes using spray can
60 minutes using roller

Consumption
Minimum 0.08 to 0.15 L/m²
Product data sheet

Glass Primer

Glass Primer

Primer for glass substrates.

Overcoat / traffic: 20 minutes
Consumption: 0.05L/m² approx.

Product data sheet
2

Reinforced waterproofing (single process)

ProTect

Product ProTect summer 20Kg

Waterproofing resin used with Triflex 110g reinforcement.

Overcoat / traffic: 45 minutes
Consumption: 3.00Kg/m²

Product data sheet

110g Reinforcement Fleece

Reinforcement fleece

Polyester fleece used with Triflex resins in Triflex fully and partially reinforced systems.

3

Embedment layer

ProTect

Product ProTect summer 20Kg

Waterproofing resin used with Triflex 110g reinforcement.

Overcoat / traffic: 1 hour
Consumption:  1.50Kg/m²

Aggregate Triflex Quartz 0.7-1.2mm: 6.00Kg/m²

Product data sheet
4

Finish

Cryl Finish 205

Product Cryl Finish 205 10Kg

Finish for Triflex roofing systems and walkway, balcony and terrace systems.

Overcoat / traffic: 1 hour
Withstand stress: 2 hours
Consumption: 0.60Kg/m²

Triflex ProTect finish colours

Finish colours

Triflex ProTect with a heavy duty finish is available in a wide range of optional finish colours, allowing the system to be tailored to meet aesthetic and project needs. Special colours can be produced to order.

Request a sample

Downloads

System overview
CAD details
File
Colour card

Looking for support?

If you require any support, have an upcoming project or just a general enquiry then please don't hesitate to get in touch, we're with you every step of the way.