Triflex Preco Line 300 is a thin layer, spray and roller applied marking system.
System build-up
Primers
Cryl Primer 222
Primer for asphalt, bitumen, timber and other substrates.
Overcoat / traffic: 45 minutes
Consumption: 0.40Kg/m²
Metal Primer
Primer for metal substrates, also available as spray can.
Overcoat / traffic:
60 minutes using spray can
60 minutes using roller
Cryl Primer 287
Primer for cementitious and other substrates.
Overcoat / traffic: 45 minutes
Consumption: 0.40Kg/m²
Than Primer L 1K
Single component primer for concrete and cementitous substrates prior to installation of Triflex marking systems.
Drying time: 20 - 30 minutes approx.
Consumption: 0.20Kg/m² minimum.
Marking
Preco Line 300
Thin layer, spray and roller applied marking system.
Curing time: 20 - 30 minutes approx.
Consumption: 0.44Kg/m² at a layer thickness of 0.3mm.
Consumption: 0.58Kg/m² at a layer thickness of 0.4mm.
Colours
Triflex Preco Line 300 is available in a wide range of standard resin colours, allowing the system to be tailored to meet aesthetic and project needs with special colours being produced to order. For full details see the Triflex Preco Line 300 colour card below.