Triflex ProPark with Quartz provides a durable anti-skid finish and is available in a range of standard colours.
Anti-skid
Tests carried out wet on new indicative samples in accordance with UKSRG Guidlines (2016):
With 0.7 - 1.2mm quartz:
- PTV approx. 75 (Four S rubber / Slider 96)
- PTV approx. 68 (TRRL rubber / Slider 55)
System build-up
Primer
Cryl Primer 222
Primer for asphalt, bitumen, timber and other substrates.
Overcoat / traffic: 45 minutes
Consumption: 0.40Kg/m²
Cryl Primer 276
Primer for cementitious and other substrates.
Overcoat / traffic: 45 minutes
Consumption: 0.40Kg/m²
Cryl Primer 287
Primer for cementitious and other substrates.
Overcoat / traffic: 45 minutes
Consumption: 0.40Kg/m²
Cryl Primer 280 White
Primer for cementitious and other substrates including out gassing substrates.
Overcoat / traffic: 45 minutes
Consumption: 0.40Kg/m²
Triflex Cryl Pinhole Paste
Solution to help prevention of pinholes in outgassing cementitious substrates.
Consumption: Approx. 0.25 - 0.30Kg/m2 in one step with primer. Approx. 0.40Kg/m2 in first and approx. 0.15 - 0.30Kg/m2 in second working step without primer
Reinforced waterproofing (single process)
ProPark
Waterproofing resin used with Triflex 110g Reinforcement
Overcoat / traffic: 1 hour
Consumption: 3.00Kg/m²
110g Reinforcement Fleece
Polyester fleece used with Triflex resins in Triflex fully and partially reinforced systems.
Waterproof wearing layer
DeckFloor
Waterproof surfacing layer used in Triflex car park systems.
Overcoat / traffic: 1 hour
Consumption: 4.00 - 4.50 Kg/m²
Aggregate: Quartz: 6.00Kg/m²
For ramp application, Triflex Thixo may be required.
Finish
Cryl Finish 209
Finish for Triflex car park systems.
Foot traffic: 1 hour
Vehicle traffic: 2 hours
Consumption: 0.60Kg/m² min.
Finish colours
Triflex ProPark with Quartz is available in a range of finish colours allowing the system to be tailored to meet aesthetic and project needs with special colours being produced to order.